Rodgers Instruments W-5000 Guía de usuario descargar pdf (Pagina 101)

Using MIDI

101

First, however, quickly review the parameters described in 'Using The W-5000 As A Sound Module' (page

94). Some of those same parameters will be useful to you. To get you started, here a few parameters you'll

need to set:

MIDI Mst Out

Port: 1, 2

This parameter determines which port (1 or 2) is used as the Master MIDI Output. Data played on the

instrument is sent from the selected port. Press [NEXT] to select this parameter. Use the [+]/[-] buttons to

choose port '1'.

MIDI Mst Out Chn

U: 1-16 L:1-16 P: 1-16

These three parameters determine which MIDI channel (1-16) will be used for the Master MIDI Output.

Data played on the instrument is transmitted on the selected channel. Press [NEXT] to select this parameter

(and to move from field to field) . Use the [+]/[-] buttons to set the channels.

MIDI Mst Out Flt

U: None, PC, CC, CC+PC, Note, PC+Note, CC+Note, All

This parameter determines what type of data is filtered out of the data sent to the Master MIDI Output from

the Upper keyboard. The following options are available:

• NONE

: No filtering is done

• PC

: Program Changes (preset selections) are filtered

• CC

: Control Changes (such as UPPER Drawbars and UPPER BALANCE sliders) are filtered

• CC+PC

: Control Changes and Program Changes are filtered

• NOTE

: Note data is filtered

• PC+Note

: Program Changes and Note data are filtered

• CC+Note

: Control Changes and Note data are filtered

• All

: All data is filtered

Press [NEXT] to select this parameter. Use the [+]/[-] buttons to select 'CC+PC'.

MIDI Mst Out Flt

L: None, PC, CC, CC+PC, Note, PC+Note, CC+Note, All

This parameter determines what type of data is filtered out of the data sent to the Master MIDI Output from

the Lower keyboard. The available options are the same as those listed above. Press [NEXT] to select this

parameter. Use the [+]/[-] buttons to select 'CC+PC'. (Preset selections and generally assignable controllers

are transmitted on the Lower MIDI Master Channel. Therefore, it is this filter that you will most likely

change, even if you are not playing on the Lower manual.)

MIDI Mst Out Flt

P: None, PC, CC, CC+PC, Note, PC+Note, CC+Note, All

This parameter determines what type of data is filtered out of the data sent to the Master MIDI Output from

the Pedalboard or keybass. The available options are the same as those listed above. Press [NEXT] to select

this parameter. Use the [+]/[-] buttons to select 'CC+PC'.

MIDI Mst Out

Exp CC#: 7, 11

This parameter determines which Control Change command is sent when the Expression pedal is moved: 7

or 11. Press [NEXT] to select this parameter. Use the [+]/[-] buttons to select '7'.

MIDI Start

Stat Send: Both, CC, PC, None

This parameter determines what type of information is sent when the W-5000 receives a MIDI Song Start or

Song Continue message: Both, CC, PC, None. If set to 'None', nothing is sent when these MIDI timing

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 164 165

Comentarios a estos manuales

Sin comentarios

Rodgers Instruments W-5000 Guía de usuario Pagina 101

Comentarios a estos manuales

Relacionado con productos y manuales para Instrumentos musicales Rodgers Instruments W-5000