Rodgers Instruments W-5000 Guía de usuario descargar pdf (Pagina 76)

Chapter 7

To remove a disk from the drive, press the Eject button firmly. Do not use excessive force to remove a disk

lodged in the drive:

• Never attempt to remove a disk from the drive while the drive is operating (the activity LED is lit); this

could result in damage to both the disk and the drive.

• Unless specifically instructed to do otherwise, always remove any disk from the drive before powering the

instrument up or down.

• To maintain the drive in good working order, make occasional use of a commercially available disk drive

cleaning kit.

FORMATTING A FLOPPY DISK

Before any disk (new or previously used) can be used in the W-5000 for the first time, it must be formatted

(prepared). To format a disk, follow this procedure:

Ê Be sure the disk's write protect tab is in the 'WRITE' position.

Ë Insert the disk into the drive.

Ì Press the [UTILITY] button in the FUNCTIONS section (under the LCD).

Í If you're using an HD disk (which we recommend), press the [NEXT] button repeatedly until the

display reads: Format HD Dsk (+). If you're using a DD disk, press [NEXT] until the LCD reads:

Format DD Dsk (+).

Î Press the [+] button to format the disk.

NOTE: Formatting a disk will erase all of the data (if any) previously stored on it. Be sure the disk

you want to use doesn't already contain important data!

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 164 165

Sin comentarios

Rodgers Instruments W-5000 Guía de usuario Pagina 76